About 50 chemical elements can be identified as
the main
constituents of minerals, slacks, alloys, and other substances by means
of simple
and inexpensive inorganic
analysis; a dozen elements can be detected even in trace amounts. Such quick tests require only
a basic knowledge of inorganic chemistry, no more than two to ten
minutes are
needed for each assay. Modern small hand-held butane torches are
recommended as
heat sources. The tests have been
selected
and, in some cases, further
developed in order
to avoid the use of extremely
poisonous and
hazardous chemicals; detailed
safety hints are
given.
This
manual is intended to be used by persons who have no access to the
facilities
of modern scientific research
institutes, such as prospectors in
the field,
scientists working at scantily equipped services and companies in less developed
countries, as well as teachers, mineral collectors, and hobby chemists.
In the General
Part a
historical introduction is followed by a description of the principal
techniques and equipment; the
classical tests used throughout
the 19th and the first half of the 20th century
are described in detail and some
basic information is given
concerning the use of the wet method, e.g. spot tests, fusion reactions and
simplified
filtration methods.
The Special Part presents identification
tests for
the different elements in the alphabetical order of their
element symbols. Some remarks are added on the
abundance and the distribution of the elements within the geological
cycle.
Further instructions are given for the preparation of test papers and
reagents
as well as a review of staining tests for carbonates and the solubility
of more
abundant minerals. Miscellaneous hints include internet connections to
supply
sources, literature, and other useful information.
The
Appendix contains a list of the necessary equipment and chemicals, references, a
colour table
of the normal spectra of alkali metals produced by cheap grating
spectroscopes,
a short glossary of geological and physical terms which may be unfamiliar to
some
users, and a subject index.
The PDF document
can
be downloaded free of
charge (88 pages, 7 figures).
The
author Prof. Dr. Walter A. Franke has studied chemistry and mineralogy,
he was Professor of Mineralogy at
Freie Universität Berlin, Germany, for more than a quarter of a
century and still gives regular lectures
on topics such as environmental
technology,
rock weathering, deserts, radioactive waste storage,
and quick assays.
Comments and questions may be
directed to the author:
Prof.
Dr. Walter A. Franke
Freie Universität Berlin,
Department of Geoscience, Haus B
Malteserstr. 74 - 100
12249 Berlin -
Germany
pdf-Datei
Durch einfache und preiswerte
anorganische Analysen lassen sich etwa 50 Elemente als
Hauptbestandteile von Mineralen, Schlacken,
Legierungen und anderen Feststoffen identifizieren. Ein Dutzend
Elemente können
selbst in Spuren nachgewiesen werden. Zwei bis zehn Minuten werden pro
Test
benötigt. Es werden nur Grundkenntnisse der anorganischen Chemie
vorausgesetzt.
Kleine Butanbrenner werden als Hitzequelle benutzt. Der Gebrauch von
extrem
giftigen und gefährlichen Chemikalien wurde vermieden;
ausführliche Hinweise zur
Arbeitssicherheit werden
gegeben.
Die
Arbeitsanweisungen sind gedacht für
Personen, die keinen Zugang zu modernen, gut ausgerüsteten
Laboratorien haben,
z.B. Prospektoren bei der Arbeit im Gelände, Wissenschaftler in
schlecht
ausgestatteten Instituten und Firmen in Entwicklungsländern, bzw.
Lehrer,
Mineralsammler und Personen, die Chemie als Hobby betreiben.
Im
General Part wird eine historische
Einführung gegeben. Es folgt eine Beschreibung der prinzipiellen
Technik und
der Ausrüstung. Die klassischen Methoden des 19. und frühen
20. Jahrhunderts
werden detailliert beschrieben; es folgen Hinweise zu nasschemischen
Methoden,
insbesondere zu Spot Tests, Aufschlussmethoden und zu vereinfachter
Filtration.
Der
Special Part präsentiert Nachweise für
die Elemente in alphabetischer Folge ihrer chemischen Symbole, dabei
werden
Hinweise gegeben zu Häufigkeit und Verteilung der Elemente im
geologischen
Zyklus. Es folgen Hinweise zur Präparation von Testpapieren und
Reagenzien, zur
Anfärbung von Karbonaten und ein Überblick zur
Löslichkeit von Mineralen in
verschiedenen Medien. Der Abschnitt Miscellaneous hints gibt Hinweise
auf
Internetverbindungen zu Bezugsquellen und Literatur, sowie andere
nützliche
Informationen.
Der
Appendix enthält eine Liste der
benötigten Geräte und Chemikalien, das Literaturverzeichnis,
eine Farbtafel der
Normalspektren der Alkalimetalle, wie sie preiswerte Gitterspektroskope
zeigen,
sowie ein kurzes Glossar geologischer und physikalischer
Fachausdrücke, sowie
ein Stichwortverzeichnis.- Das PDF-Dokument kann kostenfrei
heruntergeladen
werden.
Der
Autor Prof. Dr. Walter A. Franke hat
Chemie und Mineralogie studiert und war ein Viertel Jahrhundert
Professor für
Mineralogie an der Freien Universität Berlin; er liest weiter
regelmässig zu
Themen wie Umwelttechnik, Verwitterung, Wüstenbildung, Lagerung
radioaktiver
Abfälle und Schnelltests zur Mineralbestimmung.
key words:
mineral identification -
qualitative inorganic chemistry - blow pipe analysis
ore prospection - mineral
collectors - spot test - gold identification -
ore identification - qualitative
alloy analysis - Freie Universität - Prof. Franke-
Les directives de travail ont été élaborées pour des personnes n’ayant pas accès à des laboratoires modernes et bien équipés; par exemple des prospecteurs sur le terrain, des scientifiques travaillant dans des instituts ou des entreprises mal équipés, ou encore des professeurs, des collectionneurs de minéraux et des personnes pratiquant la chimie en tant que « hobby ».
La partie générale contient une présentation historique puis une description des principes techniques et de l’équipement. Les méthodes classiques du XIXème et du début du XXème siècle sont rapportées en détail; s’ensuivent des indications concernant les méthodes chimiques par voie humide, particulièrement les tests Spot, des méthodes de séparation par digestion et une filtration simplifiée.
La partie spéciale présente la mise en évidence des éléments par ordre alphabétique de leurs symboles chimiques. En même temps, des indications sont données concernant la fréquence et la distribution des éléments dans le cycle géologique. S’ensuivent des indications quant à la préparation de papiers tests et de réactifs ainsi que la coloration des carbonates. Ensuite, on trouve un aperçu sur la solubilité des minéraux dans différents milieux. Le passage Miscellaneous Hints contient des informations sur les connections internet en rapport avec les sources de références et la bibliographie ainsi que d’autres informations utiles.
L’appendice contient une liste des appareils et produits chimiques, la bibliographie, un tableau en couleur des spectres-étalons des métaux alcalins tels que les montrent des spectroscopes à réseaux bon marché, un bref glossaire des terminologies géologique et physique ainsi qu’une liste des mots-clefs.
Le fichier PDF peut être téléchargé gratuitement (897 Kb, 88 pages, 7 figures).
L’auteur, le Professeur Dr. Walter A. Franke, a étudié la chimie et la minéralogie, puis a enseigné pendant un quart de siècle en tant que professeur de minéralogie à la Freie Universität Berlin en Allemagne. Il continue à enseigner régulièrement sur des thèmes tels que l’ingénierie de l’environnement, les altérations des roches dues aux intempéries, la formation des déserts, le stockage des déchets radioactifs et les tests rapides de détermination des minéraux.
Mots-clefs :
Vos commentaires et vos questions peuvent être adressés à l’auteur :
Professeur Dr. Walter A. Franke
Freie
Universität Berlin
Département
des géosciences
Malteserstr.
74 –
100, Haus B
D - 12249
Berlin
Zuletzt aktualisiert am
25. November
2003 von Simone
Elsanowski